Plaster primer for exposed concrete surfaces
One-component, resin-based primer used to improve the adhesion of lime and cement-based mortars and gypsum-based coatings on surfaces such as non-textured concrete, walls, ceilings.
- Used in horizontal and vertical applications
- Used as an adherence enhancer under gypsum, lime and cement based mortars.
Features / Benefits
- Easy to prepare and apply
- It becomes ready to use by mixing with water.
- It ensures that plaster-based coatings are adhered to concrete surfaces such as curtains, columns and ceilings with sufficient strength
- Prevents cement and especially gypsum-based plasters from absorbing the mixing water by the surface.
- Does not contain solvent
- It is colored to follow the area where it is applied.
Appearance / Color Dark viscous liquid, light brown
Packaging 12 kg plastic bucket
Storage Conditions / Shelf Life
12 months from the date of production if stored in original, unopened and undamaged packages, in dry conditions, protected from moisture and frost and in a cool environment between + 5 ° C and + 35 ° C.
Chemical Base Modified polymer resin based dispersion
Density Unit weight (product)
Mix unit weight
: ~ 1.50 kg / lt
: ~ 1.30 kg / lt (Sika® Primer-10: Water, 12: 5 – by weight)
Application Thickness Minimum more than
Consumption / Dosage Consumption:
~ 0.175 – 0.250 kg / m2 (Sika® Primer-10)
~ 0.250 – 0.350 kg / m2 (Sika® Primer-10 – Water mixture)
Consumption values are theoretical, depending on the surface and application conditions. may vary. Surface Quality The surface must be dry and clean, free from materials such as dust, oil, grease, paraffin, loose and volatile particles. Surface Preparation Surface, brush, etc. It should be cleaned using appropriate cleaning equipment and prepared for application. Do not apply to damp or wet surfaces.
Application Conditions / Limitations
Substrate Temperature Minimum + 5 ° C Maximum + 30 ° C
Ambient Temperature Minimum + 5 ° C Maximum + 30 ° C
Mixing Ratio ~ 4 – 6 l water for 12 kg Sika® Primer-10
Mixing Time ~ 3 minutes
Mixing Equipment Sika® Primer-10 must
mixed in its packaging with a low-speed mixer (maximum 500 rpm) until a homogenous and lump-free mixture is obtained .
Application Method / Tools Apply
the mixture prepared with the appropriate amount of water in a single layer, evenly on the surface using a textured roller. Cleaning of Equipment All tools and equipment used in the application should be
washed with clean water immediately after use . Hardened / cured material can only be mechanically cleaned. Curing speed / Rate The surface becomes dry in approximately 2 hours at a temperature of + 20 ° C. (It depends on the ambient temperature, surface temperature, air humidity and coating thickness). At least 24 hours should be waited before applying the coating on the primer layer.
Notes on Application / Limitations
During application, it may be necessary to mix the product at certain intervals to ensure the homogeneity of the mixture.
Since it will negatively affect the adherence of the coating to be applied on it, during and after the application of Sika® Primer-10. contamination for reasons should be prevented. It should not be applied on wet, frozen or humid surfaces.
Until the applied material completes its curing, water, rain, etc. should not be exposed to the effects. In cases where a rougher surface is required, application can be made by reducing the mixing water. It should only be applied on sufficiently absorbent and solid surfaces.
All technical information contained in this product data sheet is based on laboratory tests. Actual measured data may vary due to conditions beyond our control.
may vary from country to country due to local regulations the performance of this product, please note. Please refer to the local product data sheets for exact descriptions of application areas.
Health and Safety Information
Users should refer to the material safety data sheet (MSDS) of the product, which includes physical, ecological, toxicological and other safety-related information, for information and advice on the safe transportation, storage and disposal of chemical products.
The information provided here about Sika® products, and in particular the recommendations regarding their application and end-use, are given in good faith based on Sika’s current knowledge and experience of the correct storage, handling and application of these products under normal conditions and in accordance with Sika’s recommendations. . The products, application surfaces and application areas are quite diverse in practice. Therefore, when using Sika® products, make sure you apply the right product in the right conditions and in the right place, and strictly follow the information and instructions given by Sika® regarding its commercial suitability and / or fitness for a particular purpose. Sika® is not responsible for any damage that may occur otherwise. The user (user) of the product must test the suitability of the product for the intended application and purpose.Sika reserves the right to change the properties of its products. The property rights of third parties must be observed. The acceptance of all orders is based on our current sales and shipping conditions. Users should always refer to the latest edition of the local Product Data Sheet for the respective product, which can be obtained by contacting Sika®.
Construction Sika Yapı Kimyasalları A.Ş.
Leather Org. Singing. Plenty. 2nd Road J – 7
Parcel, Aydınlı, Orhanlı Mevkii,
34957 Tuzla, İstanbul, Turkey
+90 216 444 74 52
+90 216 581 06 00
+90 216 581 06 99